Safety and Regulatory Notices | Poly Edge E Series
4
Installation of the equipment should be carried out by suitably trained people, and must comply with the
appropriate local and national electrical codes.
Accessibility
Details of the features offered by this product against the accessibility criteria of Section 508 of the US
Disability Act and Section 255 of the US Communications Act can be found at
https://www.poly.com/us/en/legal/compliance/vpat
Hearing Aid Compatibility (HAC)
This handset product complies with the HAC requirements of 47 CFR 68.316 and 47 CFR 68.317.
Emergency Access – VoIP products
Users of this VoIP product should be aware that depending on the country they are in, and the network
they are connected to, the emergency services may not be able to identify the geographic location which
they are calling from automatically from the IP address.
ENERGY STAR®
ENERGY STAR is a U.S. Environmental Protection Agency voluntary program that helps businesses and
individuals save money and protect our climate through superior energy efficiency. Products that earn the
ENERGY STAR prevent greenhouse gas emissions by meeting strict energy efficiency criteria or
requirements set by the U.S. Environmental Protection Agency. As an ENERGY STAR Partner, Poly has
followed the U.S. EPA’s enhanced product certification process to ensure that products marked with the
ENERGY STAR logo are ENERGY STAR certified per the applicable ENERGY STAR guidelines. The
following logo appears on all ENERGY STAR-certified Telephony:
A key ENERGY STAR requirement for Telephones products is power management features at the
network and device level including but not limited to OFF mode, external Network Proxy, and automatic
and timed power down of backlit displays and other functions.
Backlight intensity and timeout can be adjusted in basic user settings menu. By default, after the phone is
idle for 40 seconds, the backlight dims. The backlight automatically turns on with any phone activity.