5. When storing the product, carefully remove the product from
wherever it is placed, including tree, branches, or bushes, to avoid
any undue strain or stress on the product conductors, onnections,
and wires. Cover the protective cap on the
poles to avoid damaging the internal parts.
6. When not in use, store neatly in a cool,
dry location protected from sunlight.
7. Keep out of reach of pets and children.
Operation
Turning on the tree
Maintenance
Spare parts
Repairing Loose Hinges
NOTE: If some bulbs do not light or flicker, search for any loose
plugs and/or broken, loose, or missing bulbs. Replace bulbs
promptly with the replacement bulbs provided in order to
maintain the performance and life expectancy of your tree.
Step 1. Connect the light strings of the tree together and plug the
power cord into a wall outlet.
Step 2. If the tree comes with a foot pedal, step on the On/Off
button.
This tree package includes hinge pins, washers, bulbs, and fuses for
any replacement or repair that you need to perform on your tree. If
extra parts are needed, contact the Customer Service Team at 01
800 004 6633
Use and Care Instructions
1. Before using or reusing, inspect product carefully. Discard any z
products that have cut, damaged or frayed wire insulation or
cords, cracks in the lampholders or enclosures, loose connections,
or exposed copper wire.
2. Before disassembling the tree, unplug the tree and remove all
ornaments and decorations.
3. Gently lift the tree top straight up to remove from the center
section and fold all branches towards the pole.
4. Repeat this step for the center and bottom tree sections.
Step 1. Place the branch into the slot of the bracket.
Step 2. Insert a new hinge pin through the holes of the bracket and
secure with a washer.
Tre top
Section 2
Section 1
Insert
Green Label
Plug Into Wall
Outlet
S100
S100
S50
S100
Alexander Tree
Model: TG76M5311C02; 131185
Troubleshooting
Problem Solution
The tree
does not
light
Ensure that all tree sections are plugged into each
other and that the tree is plugged into the wall. If
your tree came with a foot pedal, step on the
On/Off button.
Check for blown fuses at the light string and power
cord plugs. Replace as needed with the replacement
fuses provided.
Check for loose, broken, or missing bulbs and
replace as needed with the replacement bulbs
provided
NOTE: The appliance is not to be used by persons (including
children) with reduced physical, sensory or metal capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction Children should be supervised to ensure
that they do not play with the appliance.
CAUTION and in essence the following: To reduce risk of fire and
electric shock: Disconnect the decorative item from the power
source before performing any maintenance or cleaning.
For indoor use only .
Do not utilize the decorative item outdoors.
S100
a) Grasp plug and remove from the receptacle or other outlet
device. Do not unplug by pulling on cord.
b) Open fuse cover. Slide open fuse access cover on top of
attachment plug towards blades.
c) Remove fuse carefully.
d) Risk of fire. Power cord replace fuse only with 5 Amp,125 Volt.
e) Close fuse cover. Slide closed the fuse access cover on top of
attachment plug.
f) Risk of fire.Do not replace attachment plug. Contains a safety
device (fuse) that should not be removed. Discard product if the
attachment plug is damaged.
SPARE FUSE
User servicing instructions
Fuse replacement
S50
Do Not Tamper
Internal Parts
Open the
protective
cap
Do Not Tamper
Internal Parts
Open the
protective
cap
To Previous Page
Loading...
Need help?
General
