3
UNPACKING INSTRUCTION
CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are
present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if
any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing
materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original
factory box and packing.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The
arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.
POWERSUPPLY
On the label on the backside of the product is indicated on this type of power supply must be connected. Check that the mains
voltage corresponds to this, all other voltages than specified, the light effect can be irreparably damaged. The product must also
be directly connected to the mains and may be used. No dimmer or adjustable power supply.
Always connect the device to a protected circuit (fuse).
INSTALLATION
1. Connect your speakers correctly with the speaker output terminal of the BT10 BT amplifier module.
For the left speaker, make sure to connect with the left 2 slots of the output terminal. For the right speaker, the right 2
slots should be used.
2. Only use the supplied adapter to connect the module with the mains supply. The adapter can be inserted in the
designated slot.
3. Enable the BT function on your device (smartphone, tablet, etc.) containing the music you want to play. Search for
possible BT connections and select “POWER DYNAMICS BT10” to make a connection. If a password is required, enter
“1234”.
To Next Page
Need help?
General
