Power Dynamics PDC-60 User Manual

5
IMPORTANT
Use of controls or adjustments or performance of procedures other than those specified herein may
result in hazardous radiation exposure.
CD player Function:
1. POWER BUTTON
Press the power switch to turn the unit on. To switch the POWER off press the POWER switch
again.
2. EJCET BUTTON
Press to load or eject disk. Each press will open or close the disk tray.
NOTE: Disc holder will not open unless stop or pause button has been pushed first.
3. PLAY/PAUSE BUTTON
Each time you press the PLAY/PAUSE button, the operation changes from play to pause or from
pause to play.
4. CUE BUTTON
Pressing the CUE button during play provides a return to the position at which play was started.
5. CD/USB BUTTON
Press this button to choose CD or USB mode while USB connect and the CDs in the tray.
6. TIME BUTTON
Used this button to choose the time mode : Elapsed time, remaining time or total remaining time.
7. REPEAT BUTTON
Use this button to repeat one track or all the track of the CD.
8. RELOOP BUTTON
This button is used to start the last saved loop. To finish the loop, press the reloop button.
9. IN BUTTON
This button sets the beginning of the loop. The Loop indicator on the display flashes.

Power Dynamics PDC-60 Specifications

General

Brand	Power Dynamics
Model	PDC-60
Category	Tuner
Language	English