13
The following pages are intended for professional installers.
11. Important installation instructions
Selecting the place to install the indoor device
The air flow must never be blocked.
The cooled air should be capable of being
distributed to all parts of the room.
The maximum distance between the indoor and
outdoor device for standard versions is 4 m.
Mount on a solid wall to prevent vibrations.
Avoid direct sunlight.
Take into account a slight condensate run-off.
Selecting the place to install the outdoor device
The device must not be exposed to strong gusts of
wind.
Make sure that the device is well ventilated and
kept free of dust. Avoid direct exposure to rain and
sunlight.
Make sure that the operational noises and air
emissions do not cause a nuisance for neighbours.
Install on a firm base, avoiding excessive noise or
vibrations.
Avoid locations where combustible gas or leakage
can be emitted.
Fix the deviceʼs installation feet with care if the
device is to be installed well above them.
Important
Do not hesitate to contact our service partners.
They will be able to give you a speedy response to
all your questions so that your system can be
installed correctly.
Over 8 cm or over 15 cm, if
the tube connection is from
the left or the back.
over 20 cm
over 20 cm
over 300 cm
over 2 m
over50 cm
over 30 cm
over 30 cm
over 50 cm
over 200 cm
To Next Page
Loading...
Need help?
General
