Protocol ALL-IN-ONE BOXING SET User Manual

INSTALLATION:
INSTALLATION:
1. Inflate the punching bag using the inflation pump and
pump needle.
IMPORTANT: This punching bag is constructed with an
inner bladder beneath the surface. When inflating the
punching bag, use care when inserting the needle. Wet
it first and then insert it GENTLY into the air hole taking
care not to puncture the inner bladder.
2. Assemble the set as shown in the
diagram to the right.
3. Remove cap and fill the base with
sand or water. Replace the cap.
17mm washer
Adjusts height
50mm washer
11mm washer

Protocol ALL-IN-ONE BOXING SET Specifications

General

Brand	Protocol
Model	ALL-IN-ONE BOXING SET
Category	Accessories
Language	English