MAINTENANCE (CONTINUED)
Replacing the HEPA Filter
1. Turn the HEPA filter anticlockwise until it can be
lifted from the canister lid.
2. Replace with a new HEPA filter and turn
clockwise to secure.
NOTE: REGULARLY CHECK THE HOSE,
TUBE AND ACCESSORIES TO ENSURE
THEY ARE NOT BLOCKED.
2. If dust bag is full, replace with a new dust bag.
3. Position dust bag back into cleaner and make
sure the opening of the bag aligns with the
hose inlet.
NOTE: THE SEAL RING AROUND DUST
BAG OPENING SHOULD COVER THE HOSE
INLET CONNECTOR INSIDE THE CANISTER.
10
To Next Page
Loading...
Need help?
General
