A
Anna OliverAug 2, 2025
Why does my Pullman WD60LSSO suction weaken or run hot?
- YywattsAug 2, 2025
There are several reasons why your Pullman Vacuum Cleaner might lose suction or overheat: * A clogged filter could be the culprit. Try brushing the dirt from the filter. If the problem persists, replace the filter. * An air leak might be present. Make sure all fittings (floor tool, hoses, etc.) are tightly connected and that the tank cover is properly sealed. * There might be an obstruction in the hose or floor tool. Inspect these parts and remove any blockages.