Pulsar Axion F Series User Manual

6.
Calibrate the image with a short press of the ON/OFF (5) button (where
calibration mode SA or M has been selected). Close the lens cap before manual
calibration.
7.
Select the required amplification level (“Normal” , “High”
, “Ultra” ) by briefly pressing the UP (4) button.
8.
Activate the quick menu by briefly pressing the MENU (3) button to adjust the
brightness, contrast and smooth digital zoom (for more details see the Quick Menu

section).
9.
Turn the device off with a long press of the ON/OFF (5).
Attention! It is forbidden to point the riflescope lens at intensive energy sources,
such as laser radiation emitting devices or the sun. It can disable the riflescope
electronic components. Warranty does not cover damage arising from failure to comply
with the operating rules.

Pulsar Axion F Series Specifications

General

Brand	Pulsar
Model	Axion F Series
Category	Monocular
Language	English