Wi-Fi networks.
Possible cause
The device has a 5 GHz network enabled, but the smartphone only supports 2.4 GHz.
Solution
Switch the device's Wi-Fi bandwidth to 2.4 GHz.
More information on solving problems with connection to Stream Vision 2 by
following thelink.
Wi-Fi signal is missing or interrupted
Possible cause
Smartphone or tablet is out of range of a strong Wi-Fi signal. There are obstacles
between the device and the smartphone or tablet (e.g., concrete walls).
Solution
Relocate smartphone or tablet into the Wi-Fi signal line of sight.
More information on solving problems with connection to Stream Vision 2 by
following thelink.
Color bars appear on the display or the image disappears
Possible cause
The device was exposed to static electricity during operation.
Solution
After exposure to static electricity, the device may either reboot automatically
or require turning off and on again.
The image quality during the device operation at below
zero temperatures is worse than at positive temperatures
Possible cause
To Next Page
Loading...
Need help?
General