Technical Maintenance and
Storage
Maintenance should be carried out no less frequently than twice a year, and should
consist of the following measures:
Wipe external plastic and metal surfaces with a cotton cloth to remove dust and
dirt. To avoid damage to the paint coating, do not use chemically active substances,
solvents, etc.
Clean the electric contacts of the Battery Pack and the device's battery slot
using a non-greasy organic solvent.
Check the objective and eyepiece lenses and if required, remove dust and dirt
(preferably using a non-contact method). Cleaning of the exterior surfaces of the
optics should only be done with products specifically designed for this purpose.
Store the device in a carrying case. Remove the Battery Pack for long-term storage.
To Next Page
Loading...
Need help?
General