iX-3 Series Base
Product Replacement Guide
Average Time Required: 15 minutes
N1. Remove the components from your original machine
Remove the weighing platform
(d) from the machine.
7
2
When opening the cover, the ink cartridge (h) moves
to the replacement position. Press down on the back
of the ink cartridge to disengage it. Lift out the ink
cartridge.
3
6
Remove LAN cable (f), weighing platform cable (e) and power
cable (g).
5
Turn o the machine by pressing the
power button.
Open the meter bay latch, pull forward the meter (i)
and remove it.
4
Machine Base
Feeding Table
Catch Tray
Machine components:
LAN Cable
Power Cable
MeterInk
Cartridge
Weighing Platform
Lift the cover of the machine to reveal the ink
cartridge (h) and meter (i) bays.
Weighing Platform
Cable
1
Remove the feeding table (b) from the franking machine base.
N2. Unpack your replacement
Remove replacement unit from box & place original unit back into
box ready for collection.
1
Lift the cover of the machine to reveal the
ink cartridge (h) and meter (i) bays.
2
1
Continue
To Next Page
Need help?
General
