quadient iX-5 Series Quick Installation Guide

Weighing Platform
Shelf
LAN Cable
Power Cable
MeterInk Cartridge
Lift machine slightly on the left hand side and align the hooks to attach the automatic feeder (b)
– attach the catch tray (c) to the right hand side of the machine.
5
Lift the cover of the machine to reveal the
ink cartridge (i) and meter (j) locations.
Attach the weighing platform (e) and
shelf (if applicable) (d).
6
Turn on the machine using the switch behind the
power cable (h) and follow the steps on screen.
8
Unpack all components from the box, remove packaging
and any transit tape.
Place the meter (j) into the meter bay and slide in until it fi ts securely
into position.
Insert the ink cartridge (i) at an angle into the machine with the ‘TOP’
and ‘LOCK’ stickers facing upwards. Push the ink cartridge (i) towards
the back of the machine until you hear a ‘click’ - close the cover of the
machine.
k
Machine Base
Automatic
feeder
Catch Tray
Machine components:
Back of the machine
4
1
3
2
1
7
Connect the weighing platform connector (f) and automatic feeder
cable (k) at the back of the machine. Then connect the LAN cable
(g) and power cable (h) to either side of the machine.
Weighing Platform
Cable
k
Automatic
feeder cable
Select LAN and press to test connection type.
OK
Installation Process
1 LAN
9
Follow the steps on screen to complete the
procedure
Next
Installation Process
Press the ‘Next’ to start the
Online service
declaration.
11
iX-5 Series Base
Quick Installation Guide
OK
Installation Process
Enter the registration PIN code
Enter the registration PIN code : 00000
10
00000
Mem
For more information or if you experience any issues, please visit :
kbhelp.quadient.com/ix5_ug_en_dl
For more help with your installation, please visit: kb.quadient.co.uk/ix5_install

quadient iX-5 Series Specifications

General

Brand	quadient
Model	iX-5 Series
Category	Postal Equipment
Language	English