Quantum DXi6900 User Manual

Chapter 6: Replication
Receive VTL
Quantum DXi6900 User’s Guide 155
Note:If a share configured for Directory/File Based Replication is locked on the target system,
synchronization jobs may fail on the source system.
5. Click Apply.
UnpackQueue
Use the UnpackQueue to view Directory/File Replication statistics for data received from the source
system.
To view the UnpackQueue, select a share and click ViewUnpackQueue (see Figure 95 below).
Figure95:Unpack Queue
The UnpackQueue displays the following information:
Barcode The barcode of the file or directory to be replicated.
State The replication state of the file or directory.
Click Refresh to update the statistics in the Unpack Queue. Click OK to return to the Directory/FileBased
page.
Receive VTL
The ReceiveVTL page allows you to manage incoming replication activity for VTL partitions. You can
recover a replicated partition on the target system if the source system is unavailable. Once the source
system becomes available, you can failback the partition to make it available on the source system again.
Note:Before you can receive replicated partitions, you must specify one or more replication sources
(see Adding a Replication Source on page 275).
To access the ReceiveVTL page, click the Replication menu, and then click the Receive>VTL tab.

Quantum DXi6900 Specifications

General

Brand	Quantum
Model	DXi6900
Category	Storage
Language	English