Quantum Scalar i6000: Drive Replacement
6-67999-01 Rev A
October 2013
Locating a Drive 3
The third number in the sequence represents the rack. Since drives can only be
contained in rack 1, this number will always be 1.
The fourth number indicates the section. Each module can contain 12 drives so
with drives, this number can range from 1-12. Drives are counted from bottom
to top.
The fifth number in the sequence identifies the column. Since drives can only be
contained in a single column, they will always reside in column 1.
To Next Page
Loading...
Need help?
General