GL300W Quick Start
Page 1 : Basic Operation
Find “Queclink GL300W_Manage_Tool_
V1.0.exe” in develop suit and run it to configure the run-
ning parameters of GL300W.
Please refer to Page 2 for detail.
Better place the GL300W under the open sky, and let
the surface which has indication Led to the sky.
Turn On GL300W
Connect GL300W to computer by USB
Data_Cable_M.
Check The Appearance Check Parts List
To mini USB To computer
Here is GPS Antenna
The USB Data_Cable_M is
not in the delivery list.
Please contact your vendor
for it.
Find“Queclink_WCDMA_USBDriver_
V1.00.rar” choose the suitable driver
for your computer system. If you
have already installed it please go to
Step 6.
Before the first time using GL300W,
please full charge the battery
Power Key
Check The Appearance
Please refer to page 2 for detail
To Next Page
Need help?
General
