Quectel WCDMA UG FTP Series User Manual

UMTS/HSPA Module Series
WCDMA UGxx FTP AT Commands Manual
WCDMA_UGxx_FTP_AT_Commands_Manual Confidential / Released 11 / 44
OK
Write Command
AT+QFTPCFG=“transmode”[,<transm
ode>]
Response
If <transmode> is not omitted:
OK
or
+CME ERROR: <err>
Else query the current settings:
+QFTPCFG: “transmode”,<transmode>
OK
Write Command
AT+QFTPCFG=“contextid”[,<contextI
D>]
Response
If <contextID> is not omitted:
OK
or
+CME ERROR: <err>
Else query the current settings:
+QFTPCFG: “contextid”,<contextID>
OK
Write Command
AT+QFTPCFG=“rsptimeout”[,<timeou
t>]
Response
If <timeout> is not omitted:
OK
or
+CME ERROR: <err>
Else query the current settings:
+QFTPCFG: “rsptimeout”,<timeout>
OK
Write Command
AT+QFTPCFG=“ssltype”[,<ssl_type>]
Response
If <ssl_type> is not omitted:
OK
or
+CME ERROR: <err>
Else query the current settings:
+QFTPCFG: “ssltype”,<ssl_type>
OK
Write Command
AT+QFTPCFG=“sslctxid”[,<sslctxID>
Response
If <sslctxID> is not omitted:
Quectel
Confidential

Quectel WCDMA UG FTP Series Specifications

General

Brand	Quectel
Model	WCDMA UG FTP Series
Category	Control Unit
Language	English