Radial Engineering PZ-DI User Manual

Radial Engineering Ltd. PZ-DI™ User Guide
MAKING CONNECTIONS
Connect the source instrument to the input using a standard ¼” instrument cable, set the appropriate load and connect
the XLR output to your mixer using a standard mic cable. The PZ-DI will convert the high-impedance unbalanced signal
to a balanced low impedance signal that will properly interface with the audio system. This will enable you to run long
balanced cables without noise or signal loss.
5

Radial Engineering PZ-DI Specifications

General

Brand	Radial Engineering
Model	PZ-DI
Category	Music Equipment
Language	English