RG55T-R Operation • Service • Maintenance
800.392.2686
5
Foreword
Certified Engine Maintenance
Proper maintenance and repair is essential to keep the engine
and machine systems operating correctly. As the heavy duty
off-road engine owner, you are responsible for the required
maintenance listed in the Engine Owner Manual & Machine
Operator, Maintenance & Service Manual.
Attach a “Do Not Operate” warning tag or a similar warning
tag to the start switch or to the controls before you service
the equipment or before you repair the equipment.
Know the width of your equipment in order to maintain proper
clearance with you operate the equipment near fences or
near boundary obstacles.
Be aware of high voltage power lines and power cables
that are buried. If the machine comes in contact with these
hazards, serious injury or death may occur from electrocution.
Wear a hard hat, protective glasses, and other protective
equipment, as required.
Do not wear loose clothing or jewelry that can snag on
controls or on other parts of the equipment.
Make sure that all protective guards and all covers are secured
in place on the equipment.
Keep the equipment free from foreign material. Remove
debris, oil, tools, and other items from the deck, from walkways,
and from steps.
Secure all loose items such as lunch boxes, tools, and other
items that are not a part of the equipment.
Know the appropriate work site hand signals and the personnel
that are authorized to give the hand signals. Accept hand
signals from one person only.
Do not smoke when you service an air conditioner. Also, do
not smoke if refrigerant gas may be present. Inhaling the fumes
that are released from a flame that contact air conditioner
refrigerant can cause bodily harm or death. Inhaling gas
from air conditioner refrigerant through a lighted cigarette
can cause bodily harm or death.
Never put maintenance fluids into glass containers. Drain
all liquids into a suitable container.
Obey all local regulations for the disposal of liquids.
Use all cleaning solutions with care. Report all necessary
repairs.
Do not allow unauthorized personnel on the equipment.
Unless you are instructed otherwise, perform maintenance
with the equipment in the servicing position. Refer to
Operation and Maintenance Manual for the procedure for
placing the equipment in the servicing position.
When you perform maintenance above ground level, use
appropriate devices such as ladders or man lift machines.
If equipped, use the machine anchorage points and use
approved fall arrest harnesses and lanyards.
Machine Description
The RG55T-R stump cutter is designed for your maximum
benefit for every dol lar spent. The machine is constructed
for durability and easy maneuvering, for those hard to reach
tree stumps and roots. Its 20” diameter cutting wheel with
24 Rayco Super teeth is pow er ful ly driven through a 54
horsepower Kubota gasoline engine. Cutting boom motion
and the self-propel drive are entirely hydraulic, with 2 speeds.
The hydraulic controls each include self-centering fingertip
control switches. The RG55T-R is also equipped with a full
function remote control feature to aid the operator when
maneuvering in and through tight areas.
The ma chine chassis features steel tubing and steel
fabricated con struc tion, mount ed on extra grip ping
deep tread non-marking tracks. The operator benefits
from a swing-out steel control station which allows
optimal windows of the cutting action, all while being
guarded by shatter resistant and heavy rubber curtains.
The RG55T-R has the unique ability to pass through a 36”
gate under its own power. Other special features of the
RG55T-R include dual cross travel cylinders, a slewing ring
that is used to pivot the cutter boom, replaceable composite
bushings on all cylinder ends, separate track drives for each
side, 6.5 gallon fuel tank, steel chain guards, and an easy
access ignition switch on the control panel.
To Next Page
Loading...
Need help?
General
