RG74T-R Operator · Service · Maintenance
2
This manual is published by Rayco Manufacturing, Inc. for the
benefit of the users of Rayco products. Rayco Manufacturing,
Inc. has made every effort to ensure that this manual is
correct and up to date at the time of publication. However,
due to continuous improvements, Rayco Manufacturing, Inc.
reserves the right to make changes in the contents, at any
time, without notice or obligation.
Each machine shipped contains operation, maintenance
& parts manuals to familiarize the operator with the proper
operating, lubricating and maintenance instructions. This
helps to ensure the best possible performance and service
from the machine. Read and understand all instructions before
attempting to operate this machine. This manual should be
readily available for reference at all times. Additional copies
of this manual may be purchased from Rayco.
This Rayco machine was designed and manufactured by
Rayco Manufacturing, Inc., Wooster, Ohio. Due to continuous
improvements, Rayco reserves the right to make changes
in engineering, design and specifications, or discontinue
manufacture, at any time, without notice or obligation.
Always have a record of the model numbers and serial
numbers for your machine to specify when ordering parts.
Record your machine model and serial numbers on page 4
for your personal records.
Introduction
NOTICE:
Maintenance and Repairs should ONLY be performed by a trained
specialists or qualified personel.
Please contact Rayco Mfg for a listing of approved maintenance
facilities in your area.
To Next Page
Loading...
Need help?
General
