Chapter 13: Storing data and Chart / CF cards 137
Using the card slot
Inserting a CompactFlash card
Chart cards can be inserted and removed while a chart is displayed.
To insert a CompactFlash card:
1. Open the chart card door.
2. Insert the card with the lip of the card facing inwards (see above).
It should position easily. If it does no, DO NOT force it but check
the direction in which the lip is facing.
3. Gently press the card home.
4. To prevent the ingress of water and subsequent damage, close
the chart card door and press firmly until it clicks.
Removing a CompactFlash card
Only remove the card while the CF Card Removal message is
displayed.
Removing a card without accessing the setup menu may result in a
system crash and/or loss of data.
To remove a CompactFlash card with the unit powered ON:
1. Press and hold the PAGE/MENU button to display the System
Setup Menu.
2. Select Remove CF Card.
3. Remove the card when the dialog states it is safe to do so.
4. DO NOT remove the card unless told it is safe to do so as
this may result in loss of data.
5. Open the chart card door.
6. Grip the card and firmly pull to remove it from the slot.
7. Close the chart card door until an audible click is heard. This will
prevent water ingress.
8. Press OK.
To remove a CompactFlash card with the unit powered OFF:
1. Open the chart card door.
2. Grip the card and firmly pull to remove it from its slot.
3. Close the chart card door until an audible click is heard. This will
prevent water ingress.
D11369-1
81314-1_A Series Reference Guide.book Page 137 Thursday, August 28, 2008 9:23 AM
To Next Page
Loading...
Need help?
General