22 RC435 and RC435i Chartplotters
3.2 Switching On/Off
➤ To turn the chartplotter unit on, press the POWER key. The keys
illuminate, the unit beeps and the Raychart logo is displayed, followed by
this warning:
WARNING:
THE ELECTRONIC CHART IS AN AID TO NAVIGATION
DESIGNED TO FACILITATE THE USE OF AUTHORISED
GOVERNMENT CHARTS, NOT TO REPLACE THEM. ONLY
OFFICIAL GOVERNMENT CHARTS AND NOTICES TO
MARINERS CONTAIN ALL INFORMATION NEEDED FOR
THE SAFETY OF NAVIGATION AND, AS ALWAYS, THE
CAPTAIN IS RESPONSIBLE FOR THEIR PROPER USE.
When you have read and understood the warning, press the ENTER key.
If this is the first time that the chartplotter has been switched on and no
chart card is installed, the display shows the background world map at
Lat. 0°/Lon 0°.
➤ To turn the unit off, press and hold the POWER key. A countdown timer is
displayed. Keep holding the key until this reaches zero when the unit will
power off.
Changing the Lighting and Contrast
You can ch a nge th e le ve l of backlightin g a nd contra st for t he sc ree n. The
backlights for the keys are constantly lit for safety. To change the lighting
and contrast:
1. Press the POWER key to display the lighting controls.
The CONTRAST control is highlighted with a dark outline.
2. Press the trackpad left/right to select the LIGHTS function.
D4698-2
To Next Page
Loading...
Need help?
General