84 RC435 and RC435i Chartplotters
2. Use trackpad left/right to select TRACK ENABLE and press ENTER.
The TRACK ENABLE text changes to indicate TRACK OFF.
The vessel’s track is displayed on-screen with a line joining the points at
the selected interval.
Clearing the Current Track
The current track can be cleared from the screen.
➤ To clear the current track:
1. Select CLEAR TRACK.
The current track is cleared from the screen and memory.
2. If no further track points are to be placed, select TRACK OFF and press
ENTER; the TRACK OFF text changes to indicate TRACK ENABLE.
SmartRoute
SmartRoute enables the latest track to be converted to a route.
➤ To convert a track to a route:
1. Select MAKE INTO ROUTE and press ENTER.
The current track is converted to a new route, with the most recently
placed track point as the start of the route. In other words, the track is
reversed.
If there is an unsaved current route on screen, the option to save the
route is given, see Section 5.3, Working with Routes.
2. Check the calculated route and that the route deviation from the orig-
inal, given in the warning box, is within navigable limits.
To Next Page
Loading...
Need help?
General