Need Help? Visit our website at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00am - 5:00pm Pacific Time.
1
WARNING
Step 1
Step 2
Required Tools: (Not included)
A. 4 mm Allen wrench
B. Flat screwdriver
C. 5 mm Allen wrench
CAUTION: To avoid potential shock or other injury, turn power switch OFF and disconnect
charger before conducting any assembly or maintenance procedures. Failure to follow these
steps in the correct order may cause irreparable damage.
Using a 4 mm Allen wrench, loosen and remove the four
(4) bolts that attach the t-bar to the stem.
Remove the t-bar from the stem being careful not to
damage the wires. Using both hands disconnect the plug
from the t-bar.
C25/C25 SLA
FOLDING MECHANISM - STEM REPLACEMENT
PART # W13113290055
To Next Page
Need help?
General