3
3. Set the speaker in the mounting bracket
at the desired angle and securely tighten
the two large thumbscrews.
4. Slide the keyhole slots on the mounting
bracket over the heads of the screws.
You can also mount your speaker
without the bracket. Use the keyhole
slot on the back of the speaker.
Note: The RCA logo can be rotated. You
might want to turn it 90 degrees when you
mount the speaker horizontally.
Care
Keep the speaker dry; if it gets wet, wipe it
dry immediately. Use and store the speaker
only in normal temperature environments.
Handle the speaker carefully; do not drop it.
Keep the speaker away from dust and dirt,
and wipe it with a damp cloth occasionally
to keep it looking new.
Caution: You might permanently damage
your speakers by cleaning them with a
vacuum cleaner. Use a feather duster or a
soft loose cloth instead.
Service and Repair
If your speaker is not performing as it
should, take it to your local RadioShack
store for assistance. To locate your nearest
RadioShack, use the store locator feature on
RadioShack's website
(www.radioshack.com), or call 1-800-The
Shack (843-7422) and follow the menu
options. Modifying or tampering with the
speaker's internal components can cause a
malfunction and might invalidate its
warranty.
To Next Page
Loading...
Need help?
Audio Specifications
Weight and Dimensions
