DO NOT RETURN this product to the store! Visit
RCAAntennaHelp.com for instructional and how-to videos.
Note: If your TV’s antenna input
is already connected to a satellite
receiver, cable box, or digital
converter, connect the antenna’s
coaxial cable to the antenna input
jack on that device.
STOP!
Insert the power adapter into the
antenna’s DC jack. Plug the other
end into a wall outlet or power
strip.
To start, extend the antenna’s dipoles (rods) to their
full length.
You might nd that different channels require
different antenna adjustments. If you’re not receiving
channels you normally receive, try the following
adjustments in the order listed here:
> Rotate the antenna’s dipoles. Try them at different
lengths.
> Rotate the base of the antenna. (Don’t forget to
move it back to its original position for the other
channels.)
Out to TV
DC
Use the RCA Signal Finder App to nd
the best location for your antenna.
1
In the Google Play or Apple App
Stores, search for “RCA Signal Finder”
and look for the icon shown here. Then
download and install the App.
Launch the App and follow the
directions there to nd the best
location and orientation for your
antenna.
Antenna Placement Tips
Avoid metal surfaces (like a metal stand).
Move the antenna close to or in a window.
Position the antenna as high as possible.
Connect the antenna to your TV.
2
Plug in the antenna.
3
Adjust your antenna for best
reception.
4
Most TVs have a channel scan option in their menu
system, many times in a SETUP or CHANNEL menu
under ANTENNA.
For detailed instructions on performing a channel
scan, see the owner’s manual that came with your
TV.
Important: You must perform a channel scan to
receive any channels!
Scan for channels on your TV.
5
Check out setup videos at
www.RCAAntennaHelp.com
ANT1268E Insert 01
Versión
en español
al dorso
AMPLIFIED
indoor antenna
QUICK START GUIDE
To Next Page
Need help?
General
