13
EN
Setting Up a CD Program
1. While the CD player is stopped, press
PROG/SET to enter program mode. The
system displays the next available program
number (-- -- P:01).
2. Press the corresponding disc number on the
main unit or DISC SKIP on the remote control
to select disc.
3. Press SKIP BACKWARD / SKIP
FORWARD to select the track to enter
into memory.
4. Press PROG/SET to save your settings.
5. Repeat steps 2 to 4 to store more tracks into
program memory.
Playing a Program List
While in PROGRAM mode, press
PLAY/PAUSE .
If you are not currently in program mode, press
PROG/SET to enter program mode before
pressing PLAY/PAUSE .
Display Program List
1. While the CD player is stopped, press
PROG/SET to enter PROGRAM mode.
2. Press PROG/SET repeatedly to view each track
assignment in the program list.
Edit Program List
1. Follow “Display Program List” steps until the
location to be edited is displayed.
2. Repeat steps 2 to 4 under “Setting Up a CD
Program “ to edit the track to store into
memory.
Deleting Program List
While in PROGRAM mode, press and hold
STOP for 3 seconds. They system displays the
message CLEAR.
Radio
Tips:
You can create a program of up to 32 tracks.
Note:
Only the first 99 tracks from each disc can
be programmed.
12
EN
CD Player
Selecting Tuner Band
1. Press SOURCE repeatedly to enter Tuner mode.
2. Press BAND to select between FM or AM
radio band.
Tuning to a Station
Press SKIP BACKWARD or SKIP
FORWARD to select frequencies.
Using Presets
Press PREV/NEXT on the main unit or
FOLDER/PRESET or on
the remote control to access the previous or
next preset station. The PROG icon lights up
when a preset station is selected.
The display first shows the preset program
number and after a few seconds, the frequency
will be displayed.
(PR:01 is FM preset 1)
Auto Preset Programming
(FM only)
Press and hold the BAND button for 2 seconds to
scan stations in FM band. The stations will then
be stored as preset channels. A maximum of 32
stations can be stored. Beware of your preset
channels being erased accidentally because the
scanning and storing process is automatic upon
pressing the button. You can stop the automatic
scan by pressing any button, but the erased
stations cannot be recovered.
Manually Setting Presets
1. Press SKIP BACKWARD or SKIP
FORWARD to access the desired
frequency.
2. Press the PROG/SET button once.
3. The most recently accessed program location
will be displayed.
4. If a different program location is preferred,
press PREV/NEXT on
the main unit or FOLDER/PRESET or
on the remote control to move to
the desired preset number (1-32).
5. Press PROG/SET to store the selected
frequency at that preset.
Suppressing Stereo Signal
Press FM ST to toggle between FM mono and
stereo mode (remote control only). “STEREO” is
displayed in stereo mode.
Tips:
Your audio system has 32 preset stations.
To Next Page
Loading...
Need help?
General
