Reebok inversion table RBBE1996.1 User Manual

12
17. Attach the Headrest (20) to the Headrest
Frame (9) with two M6 x 18mm Button Screws
(
55), an M6 x 55mm Button Screw (56), and
three M6 Washers (62).
Attach the Backrest (21) to the Backrest
Frame (8) in the same way.
17
20
21
8
62
62
18. Attach a Handle (12) to the Left Frame (4) with
two M10 x 80mm Button Bolts (52), two M10
Curved Washers (50), and two M10 Nylon
Locknuts (65).
Attach the other Handle (12) in the same
way.
Make sure that all parts are properly tight-
ened before you use the inversion table.
18
65
50
52
12
12
65
4
5
6
55
9
35
13
65
10
WARNING:
HOW TO LOCK THE INVERSION TABLE
FOR STORE DISPLAY OR TO PREVENT
UNSUPERVISED USE
When the inversion table is displayed in a
store, or when it is not in use, it should be
locked to prevent unsupervised use. First,
insert the threaded end of the Lock Pin (35)
into the Support Leg (13), and position the
other end of the Lock Pin on top of the Leg
Frame (10). Then, tighten an M10 Nylon
Locknut (65) onto the Lock Pin.

Reebok inversion table RBBE1996.1 Specifications

General

Brand	Reebok
Model	inversion table RBBE1996.1
Category	Fitness Equipment
Language	English