Reolink Keen Ranger PT User Manual

3. A blue LED will flash for a few seconds and then go solid before going out. You
will hear a voice prompt "Network connection succeeded”, which means the
camera has been successfully connected to the network.
Note:
You may also run into the following situations:
No.
Voice Prompts
Camera Status
Solutions
1
“SIM card cannot be
recognized”
Camera cannot
recognize this SIM
card.
1. Check if the SIM card is
facing the reverse
direction.
2. Check if the SIM card is
not fully inserted and
insert it again
.
2
“The SIM card is locked
with a PIN. Please
disable it”
Camera cannot
recognize this SIM
card.
Put the SIM card into your
mobile phone and disable
the PIN.

Reolink Keen Ranger PT Specifications

General

Type	IP security camera
Day/night mode	Yes
Placement supported	Outdoor
Connectivity technology	Wireless
Built-in HDD	No
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	128 GB
Pan range	0 - 355 °
Tilt angle range	0 - 140 °
Total megapixels	4 MP
Maximum resolution	2560 x 1440 pixels
Video formats supported	H.265
DC output current	2 A
DC output voltage	5
Power source type	Battery, Solar
Wi-Fi	-
4G standard	LTE-FDD
3G standards	WCDMA
Mobile network generation	4G
LED type	IR
Infra-red wavelength	940 nm
Night vision distance	10 m
Number of illumination LEDs	12
Audio system	2-way
Number of cameras	1
Sensor type	CMOS
Optical sensor size	1/3 \
Digital zoom	16 x
Alert notification type	E-mail, Push notification
Operating temperature (T-T)	-10 - 55 °C
Form factor	Dome
Mounting type	Wall/Pole
Product color	Camouflage
International Protection (IP) code	IP64

Weight and Dimensions

Width	98 mm
Height	112 mm
Weight	485 g