Appendix
116
9
Machine Status and Configuration
You can check the machine status and configuration using telnet or UNIX.
❖
❖❖
❖ telnet
Use the "info" or "status" command.
❖
❖❖
❖ UNIX
Use the "lpr" or "lpstat" command, or "stat", "info" parameter of rsh, rcp, or
ftp.
Machine status
Status Description
Call Service Center Call service center and ask for assistance.
Card/Counter not inserted The machine is waiting for prepaid card or key
counter to be inserted.
Coin/Key Counter not inserted The machine is waiting for coin or key counter
to be inserted.
Coin or amount not inserted The machine is waiting for coin to be inserted.
Cover Open: Bridge Unit Left Bridge unit left cover is open.
Cover Open: Bridge Unit Right Bridge unit right cover is open.
Cover Open: Finisher Finisher cover is open.
Cover Open: Front Cover The machine’s front cover is open.
Cover Open: Lower Right Cover The machine’s lower-right cover is open.
Cover Open: Right Cover The machine’s center-right cover is open.
Cover Open: Upper Right Cover The machine’s upper-right cover is open.
Empty: Toner Toner has run out.
Energy Saver Mode The machine is standing by in Energy Saver
mode.
Error: Duplex Unit Duplex unit is not installed correctly.
Error: Ethernet Board An Ethernet board error has occurred.
Error: HDD Board A hard disk drive board error has occurred.
Error: IEEE1394 Board An IEEE 1394 board error has occurred.
Error: Memory Switch Memory switch data is corrupt.
Error: Memory Value A memory error has occurred.
Error: Parallel I/F Board A parallel interface board error has occurred.
Error: USB Interface A USB interface board error has occurred.
Error: Wireless Card Wireless card is not inserted.
To Next Page
Loading...
Need help?
General
