Using SP Modes
D009/D011/D012/D013/D091/D092 5-8 SM
5.3.3 NIP BAND WIDTH ADJUSTMENT: SP1-109
When paper wrinkling or image offset occurs, the pressure from the pressure roller can be
adjusted by changing the position of the pressure springs. At this time, the nip bandwidth
can also be checked with SP1-109.
1. Execute SP5-802 to perform a free run of about 50 sheets.
2. Open SP1-109-1, press
, and then press Yes to confirm the selection.
3. Press Copy Window to return to the copy window.
4. Place an OHP sheet (A4/8.5" x 11" LEF) on the by-pass feed tray.
5. Press Start
twice. The OHP sheet stops in the fusing unit for about 10 seconds,
then it exits automatically.
6. Check the nip bandwidth [A].
 Check the nip bandwidth around the center of the OHP.
Nip band Specification: 7.0 ± 0.5 mm
To Next Page
Loading...
Need help?
General
