SD Card Appli Move
D009/D011/D012/D013/D091/D092 5-20 SM
Note that the following errors could occur during downloading:
 If a card is not installed in the Card Slot and a message tells you that downloading
cannot proceed, you cannot execute downloading, even by pressing "1".
 If the correct card for the NVRAM data is not inserted in the Card Slot, after you press
"1" a message will tell you that downloading cannot proceed because the card is
abnormal and the execution will halt.
5.6 SD CARD APPLI MOVE
5.6.1 OVERVIEW
The service program "SD Card Appli Move" (SP5-873) lets you to copy application
programs from one SD card to another SD card.
Slot 1 and Slot 2 are used to store application programs. However you can move
application programs from Slot 2 to Slot 1 with the following procedure.
If PostScript3 is not to be installed, the printer/scanner card in slot 1 has enough space for
the other applications. Use the printer/scanner card as a destination card.
But if PostScript3 is to be installed, use the PostScript3 card as a destination card because
moving the data from the PostScript3 card is not licensed from the maker of this software.
Use caution when you do the SD Card Appli Move procedure:
1. The data necessary for authentication is transferred with the application program from
an SD card to another SD card. Authentication fails if you try to use the SD card after
you copy the application program from one card to another card.
2. Do not use the SD card if it has been used by the user on the computer. Normal
operation is not guaranteed when such an SD card is used.
3. Return the SD card to a customer for safekeeping place after you copy the application
program from one card to another card. This is done for the following reasons:
 The SD card can be the only proof that the user is licensed to use the application
program.
 You may need to check the SD card and its data to solve a problem in the future.
4. You cannot copy PostScript data to another SD card. You have to copy other data to
the same SD card that stores PostScript data.
Rev. 03/09/2012