System Software Installation (USB Method)-6
Suggested action:
Replace the hard disk drive.
System Software Installation (USB Method)-7
Symptom:
The LED on the E-24B shows error codes EE
44. EE 44....
Possible cause:
The USB device may have a corrupted image file, or your hard disk drive cannot be accessed.
Suggested action:
1.
Run Windows Disk Error Check on the USB device.
2. Prepare the USB device again using the Fiery USB Setup Tool.
3. Use another computer with an external connection to format the hard disk drive, if the installer
cannot write to the hard disk drive.
4. If the above actions do not work, replace the hard disk drive.
System Software Installation (USB Method)-8
Symptom:
The LED on the E-24B shows error codes EE 45. EE 45....
Possible cause:
Failed to install bootloader.
Suggested action:
1.
Use another computer with an external connection to format the hard disk drive, if the installer
cannot write to the hard disk drive.
2. If the above actions do not work, replace the hard disk drive. [Link to page 78]
Backup and Restore
Backup and Restore-1
Symptom:
The LED on the E-24B shows error codes EE 21. EE 21....
5. Troubleshooting
168
To Next Page
Loading...
Need help?
General
