198
Changing Camera Settings
5
The following five operation sounds are made during camera
operation.
Note ----------------------------------------------------------------------------------------------
If you try to perform an operation that cannot be performed, the beep sound can be heard
regardless of the [Operation Sounds] setting.
1
Display the setup menu.
• For the operating procedure, see P.184.
2
Press the " button to select [Operation Sounds] and
press the $ button.
3
Press the !" buttons to select
the desired setting.
4
Press the MENU/OK button.
Note ----------------------------------------------------------------------------------------------
The operation sound setting can be changed. (GP.199)
Changing the Operation Sound
Setting (Operation Sounds)
Start sound : Sound when the camera is turned on.
Shutter : Sound when the shutter release button is pressed.
Focus sound : Sound when the shutter release button is half-pressed and the
camera focuses on the subject.
Beep Sound : Error sound indicating an operation that cannot be performed.
LevelSound : When [Level Setting] is set to [Sound] or [Disp + Snd] (GP.202),
the sound is continually emitted at a set interval when the camera is
level in shooting mode.
Available Settings Description
All
*Default setting
All sounds on
LevelSound Only the level sound will emit.
Shutter Only the shutter sound and level sound will emit.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
