Ricoh IM C4510 User Manual

Basic Operation of the Machine
19
1
Basic Operation of the Machine
Turning On and Off the Power
To turn the machine on and off, press the main power switch on the front right side of the
machine.
• When you are using the fax function on the machine, do not turn the power off
under normal operation. If the power is turned off, data stored in the fax
memory will be lost in about one hour after the machine is turned off. If you have
to turn the power off or unplug the power cord for some reason, make sure 100%
is shown as available memory on the screen for the fax function.
Turning On the Main Power
• Do not press the main power switch repeatedly. When you turn the power on or
off, wait at least 10 seconds after confirming that the main power indicator on
the right side of the control panel has turned on or off.
1. Make sure the power cord is firmly plugged into the wall outlet.
2. Open the cover of the main power switch on the front right side of the machine, and
push the switch.
The main power indicator on the right side of the control panel turns on.

Ricoh IM C4510 Specifications

General

Category	All in One Printer
Print Speed	45 ppm
Print Resolution	1200 x 1200 dpi
Copy Speed	45 cpm
Copy Resolution	600 x 600 dpi
Standard Functions	Print, Copy, Scan, Fax
Warm-up Time	21 seconds
Hard Disk Drive	320 GB
Monthly Duty Cycle	150, 000 pages
Type	Laser
Scan Resolution	600 dpi
Fax Resolution	200 x 200 dpi
Paper Capacity	Standard: 1, 200 sheets; Maximum: 4, 700 sheets
Duplex Printing	Yes
Network Connectivity	Ethernet, Wi-Fi, USB
Memory	2 GB RAM
Control Panel	10.1" Smart Operation Panel
Operating System Compatibility	Windows, Mac, Linux