Before Replacing Parts
SM 3-1 J012/J013/J014
Replacement
Adjustment
3. REPLACEMENT AND ADJUSTMENT
3.1 BEFORE REPLACING PARTS
3.1.1 REMOVAL TABLE
A swap-and-repair system is used for this printer. The table below lists the level of difficulty
for replacement of each item.
Level 1: Replaced by User
Component Comments
1 ARDF Auxiliary Tray J013/J014
2 ARDF Friction Pad
3 Duplex Unit Installed on back of machine
4 End Fence Inside paper cassette
5 End Fence Inside PFU
6 Firmware Update Through USB Connection
7 Ink Cartridge
8 Ink Collector Unit
9 Ink Tank Cover Top
10 Key Switch Panel Operation Panel
11 NIB Cover Protects inserted NIB
12 Operation Panel Fax Seal
14 Original Cover
16 Paper Cassette Standard
17 Paper Cassette (PFU) Option
18 Paper Output Tray On top of paper cassette
To Next Page
Loading...
Need help?
General
