Ricoh MP 2014AD User Manual

PCDU Section
SM 4-36 D245/D246/D247
13. Load new developer.
14. Reassemble the PCDU.
15. Install the PCDU in the machine.
16. Reassemble the machine.
17. Plug in and turn on the main power switch of the machine.
18. Execute SP2-801-001 (Deve Initializati Init TD Sen Execu) to reinitialize the TD sensor.
 Make sure no toner or developer stays on the gear. Clean the gears as necessary
with a blower brush, etc.
 Be sure to replace the Mylar at the rear side in the correct position. (The Mylar
protects the gears at the rear side from falling toner).

Ricoh MP 2014AD Specifications

General

Print Technology	Laser
Max Print Resolution	600 x 600 dpi
Paper Capacity	250 sheets
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Connectivity	USB 2.0
Dimensions	587 x 581 x 461 mm
Functions	Print, Copy, Scan
Multiple Copy	Up to 99 copies
Paper Input Capacity	250 sheets
Paper Output Capacity	250 sheets
Paper Size	A3, A4, A5, B4, B5
Power Source	220-240V, 50/60Hz
Print Speed	20 ppm
Duplex Printing	Automatic
Fax Transmission Speed	33.6 kbps
Network Connectivity	Optional
Warm-up Time	Less than 31 seconds