Message Cause Solution
"Exceeded the maximum
number of sheets that can be
used. Copying will be
stopped."
The number of pages the
user is permitted to copy has
been exceeded.
For details about how to check the
number of copies available per user,
see "Managing Print Volume per User",
Security Guide.
"Exceeded the maximum
number of multi-sheet fold.
Printing will be cancelled."
A print job was canceled
because more than the
maximum number of multi-
sheet folds was specified.
Specify fewer sheets for the multi-sheet
fold function.
For details about the maximum number
of multi-sheet fold, see "Fold", Print.
"Stapling capacity
exceeded."
The number of sheets per set
is over the staple capacity.
Check the stapler capacity. For details
about the stapler capacity, see
"Specifications for Finisher SR4120",
"Specifications for Booklet Finisher
SR4130", or "Specifications for
Finisher SR4080", Maintenance and
Specifications.
"File being stored exceeded
max. number of pages per
file. Copying will be
stopped."
The scanned originals have
too many pages to store as
one document.
Press [Exit], and then store again with
an appropriate number of pages.
"Magazine or Booklet mode
is not available due to mixed
image mode."
You selected the
"Magazine" or "Booklet"
function for originals
scanned using different
functions, such as copy and
printer.
Make sure originals for the
"Magazine" or "Booklet" function are
scanned using the same function.
"Maximum number of sets is
n."
("n" is replaced by a
variable.)
The number of copies
exceeds the maximum copy
quantity.
You can change the maximum copy
quantity from [Max. Copy Quantity] in
[General Features] under [Copier /
Document Server Features]. For details
about Max. Copy Quantity, see
"General Features", Copy/ Document
Server.
Messages Displayed When You Use the Copy/Document Server Function
161
To Next Page
Loading...
Need help?
General
