SC No. Type Error Name/Error Condition/Major Cause/Solution
SC161-20 D IPU error (DRAM initialization failure)
An error occurred during performed every time the machine is turned on,
or returns to full operation from energy save mode.
• IPU defective (Macaron/ DRAM device connection error)
• DRAM device defective
Check if the SC occurs by turning the power OFF then ON. If the SC
occurs again, do the following steps. Check if the SC reoccurs by cycling
the power after each step.
1. Reconnect the all connectors on IPU board if they are disconnected,
or loose.
2. Replace the IPU, and BCU.
SC No. Type Error Name/Error Condition/Major Cause/Solution
SC195-00 D Machine serial number error
Comparison of the product identification code in the machine serial
number (11 digits).
The product identification code in the machine serial number (11 digits)
does not match.
Re-enter the machine serial number.
Service Call 101-195
869
To Next Page
Loading...
