Large Delivered Sheets Are Not Stacked Properly
Cause:
When using large-size or coated and paper-to-paper friction is very high, a sheet may push against
another or paper deflection may occur.
This is likely to occur if:
• B4 , 8" × 14" , or larger size of paper is used.
• Paper that produces high paper-to-paper friction is used.
• The temperature or humidity is high.
Sheet bending
The leading edge of the delivered sheet bends upward and backward.
Output tray
Paper exit
Paper feed direction
CEZ594
One sheet pushing out another
Because of high paper friction, the delivered sheet may get stuck and push out other sheets of
paper.
Output tray
Paper exit
Paper feed direction
CEZ595
Paper deflection
Because of high paper friction, the delivered sheet may arch up and become crimped.
5. Post-Processing Option Troubleshooting
142
To Next Page
Loading...
Need help?
General
