• After loading paper in the tray, specify the paper type and size using the control panel. Also,
specify the printer driver's paper setting accordingly before printing.
• For details about supported types of paper, see p.84 "Paper and Other Media".
• For details about specifying the paper type and size, see p.113 "Specifying Paper Type and
Paper Size".
Loading Envelopes
• The inside of this machine becomes very hot. Do not touch the parts labeled " " (indicating a
hot surface).
• Before printing on envelopes, make sure to lower the levers on the machine rear, inside the rear
cover, to avoid envelopes coming out creased. Also, pull up the levers back to their original
positions after printing. Leaving the levers lowered can cause print quality problems when printing
on paper other than envelopes.
• Avoid using self-adhesive envelopes. They may cause machine malfunctions.
• Check there is no air in the envelopes before loading.
• Envelopes whose flaps are open must be printed with the flaps open, and envelopes whose flaps
are closed must be printed with the flaps closed.
• Load only one size and type of envelope at a time.
• Before loading envelopes, flatten their leading edges (the edge going into the machine) by running
a pencil or ruler across them.
2. Getting Started
110
To Next Page
Loading...
Need help?
General
