Ricoh SP 3510SF User Manual

Basic Operation in Copier Mode
This section describes the basic procedure for making photocopies.
• The original in the ARDF or ADF takes precedence over the original on the exposure glass if you
place originals both in the ARDF/ADF and on the exposure glass.
1. Press the [Copy] key.
CMF131
2. Place the original on the exposure glass or in the ARDF/ADF.
If necessary, configure advanced photocopy settings.
3. To make multiple copies, enter the number of copies using the number keys.
4. Press the [Start] key.
CMF141
If you are using the Type 2 model, depending on the machine's settings, "Set Back Side" appears
on the screen when using the exposure glass.
• If you want to copy the back side of the original, proceed to the next step.
• If you want to end the job, press [ ]. A copy will be output.
5. Turn over the original on the exposure glass, and then press the [Start] key.
A 2-sided copy will be output, and "Set Front Side" appears on the screen.
Basic Operation in Copier Mode
153

Ricoh SP 3510SF Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Scan Resolution	600 x 600 dpi
Fax	Yes
Paper Capacity	250 sheets
Automatic Document Feeder	Yes
Functions	Print, Copy, Scan, Fax
Duplex Printing	Yes
Maximum Paper Size	A4
ADF Capacity	35 sheets
Memory	128 MB
Fax Transmission Speed	33.6 Kbps
Connectivity	USB 2.0, Ethernet
Operating System Compatibility	Windows