600004W-005 D 11/23
© 2023, RIDGID TOOL COMPANY
Dual Suction Sump Pumps
www.homedepot.com
Intended for Indoor Use Only
Operating Instructions and Parts Manual Dual Suction Series
Please read and save these instructions. Read carefully before attempting to assemble, install,
operate or maintain the product described. Protect yourself and others by observing all safety
information. Failure to comply with instructions could result in personal injury and/or property
damage! Retain instructions for future reference.
SPECIFICATIONS
POWER SUPPLY REQUIREMENTS 120 V, 60 Hz
MOTOR Single Phase, Dielectric Oil Filled
HORSEPOWER
1 HP...............(
1000RSDS
)
1/2 HP............
(500RSDS)
1/3 HP............
(330RSDS)
CIRCUIT REQUIREMENTS 15 A (minimum)
DIMENSIONS
12 in. high x 7-1/2in. base
(ALL MODELS)
ON LEVEL (FACTORY SET)
Approximately 9 in.
(ALL MODELS)
OFF LEVEL (FACTORY SET)
Approximately 4 in.
(ALL MODELS)
CONSTRUCTION
MOTOR HOUSING Stainless Steel
MOTOR SHAFT Carbon Steel
IMPELLER Dual Glass Reinforced Thermoplastic
VOLUTE Cast Iron
PUMP DISCHARGE 1-1/2 in. NPT
PERFORMANCE (Gal/hr)
Model HP
Discharge Head (Lift Distance)
0 ft 5 ft 10 ft 15 ft 20 ft
1000RSDS 1
6360 5700 4980 4140 3240
500RSDS 1/2
4980 4140 3240 2100 720
330RSDS 1/3
4440 3780 2940 1920 660
To Next Page
Need help?
General
