Installation Guide RIGOL
1
Rack Mount Kit
MSO1000Z/DS1000Z/DG4000
This rack mount kit is designed to mount RIGOL MSO1000Z/DS1000Z series digital
oscilloscope or DG4000 series function/arbitrary waveform generator into a 19-inch
machine cabinet that conforms to the Electronic Industries Association (EIA) standard. This
manual takes DG4000 as an example to introduce the installation method.
Kit Part Checklist
No. Name Qty. Description
1
Front Plate 1 --
2
Bottom Plate 1 --
3
Left Plate 1 --
4
Right Plate 1 --
5
Retaining Bracket 2 --
6
Fastener 2 --
7
M4 Screw 18 M4×8 Phillips Pan Head Screw
8
M6 Screw 4 M6×16 Phillips Pan Head Screw
9
M6 Nut 4 M6 Square Lock Cage Nut
RIGOL
7 8 9
1
5
8
3
7
6
4
2
9
Installation Guide RIGOL
2
Installation Tool
The PH2 Phillips screwdriver is recommended.
Space Requirements
To mount the instrument into the cabinet correctly, please ensure that the following
requirements are met.
The cabinet must be a standard 19-inch one.
The available height of the cabinet should be at least 4U (177.8 mm).
The depth of the cabinet should be at least 400 mm.
The dimensions of the rack-mounted instrument are as shown below.
Unit: mm
To Next Page
Need help?
General
