ring Z-Wave Technical Manual

2
Ring Keypad
Introduction
Ring Alarm Keypad is a wireless accessory for the Ring Alarm system which provides users the ability
to arm and disarm their system, view system status, and manage alarm conditions. After installing the
Keypad and setting up the Keypad in the Ring app, perform arming and disarming actions as well
as receive system indications for dierent status updates and events. The Ring Alarm Base Station is
required to enable Keypad features and functions within the Ring app.
Notes:
1. This product can be operated in any Z-Wave™ network with other Z-Wave certified devices from
other manufacturers. All mains operated nodes within the network will act as repeaters regardless of
vendor to increase reliability of the network.
2. SmartStart enabled products can be added into a Z-Wave network by scanning the ZWave QR Code
present on the product with a controller providing SmartStart inclusion. No further action is required
and the SmartStart product will be added automatically within 10 minutes of being switched on in
the network vicinity.

ring Z-Wave Specifications

General

Brand	ring
Model	Z-Wave
Category	Security System
Language	English