EasyManuals Logo
Home>Roadstar>Clock Radio>CLR-2615

Roadstar CLR-2615 User Manual

Roadstar CLR-2615
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
English English
SLEEP FUNCTION
1. This function enables you to go to sleep listening to the Radio.
2. Set the FUNCTION Selector (1) to OFF or AUTO/BUZZER.
3. Press the SLEEP Button (6). The clock display will show 59 minutes.
The Radio turns on and will turn off automatically after 59 minutes.
4. To select a shorter time press the MINUTE Button (8) while holding
the SLEEP Button (6) until the desired sloop time is displayed.
5. To turn off the Radio at any time during the Sleep period, press
the SNOOZE Button (10).
CARE AND MAINTENANCE
To prevent fire or shock hazard, do not allow this clock radio to be
exposed to rain or moisture.
This clock radio should not be exposed to direct sunlight, very high or
low temperature, moisture, vibration, or placed in a dusty environment.
Do not use abrasives, benzine, thinners, or other solvents to clean the
surfaces of the clock radio. To clean it, wipe with a mild non-abrasive
defergent solution on a clean soft cloth.
Never attampt to Inset wires, pins, or other objects into the venlilation
holes or openings on the clock radio.
Note: When setting the Clock or Alarm times remember that this rclock
radio has a 24 Hour clock.
AC POWER
For your own solely read following instructions carefully before attempting
WAKE TO THE RADIO
1. Set the alarm time as shown above.
2. Set the FUNCTION Selector (1) to the ON position.
3. Set the Band Selector (11) to the desired radio band, and follow
the procedure in LISTENING TO THE RADIO to tune the radio to
a station.
4. Set the VOLUME Control (2) to a level you feel will wake you.
5. Set the FUNCTION Selector (1) to the AUTO/BUZZER position.
6. To switch off the alarm either press the ALARM OFF Button (16) or
set the FUNCTION Selector (1) to the OFF position.
LISTENING TO THE RADIO
1. Set the FUNCTION Selector (1) to the ON position.
2. Set the BAND Selector (11) to the desired band (FM or MW).
3. Turn the TUNING Knob (12) until the desired station is heard.
4. Adjust the VOLUME Control (2) to a comfortable listening level.
5. To turn off the radio, set the Function Selector (1) to the OFF
position.
Note: The MW band uses a built in directional serial. You may have
to rotate the clock radio for the best reception.
SNOOZE FUNCTION
When the alarm sounds, pressing the SNOOZE Button will temporary
stop about 9 minutes then the alarm sounds again.
56

Other manuals for Roadstar CLR-2615

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Roadstar CLR-2615 and is the answer not in the manual?

Roadstar CLR-2615 Specifications

General IconGeneral
Radio typeClock
Tuner typeAnalog
AM band range530 - 1600 kHz
FM band range88 - 108 MHz
PLL synthesizer-
Supported radio bandsAM, FM
RMS rated power- W
Display typeLCD
Backlight colorBlue
Display diagonal1.2 \
Product colorBlack
Input voltage230 V
Apple docking compatibilityNot supported
Battery voltage9 V
Battery life (max)24 h
AC input frequency50 Hz

Related product manuals