To Next Page

Installation Instructions

Original Instructions

GuardLogix 5580 Controllers

The GuardLogix® 5580 controllers help enable faster system performance, capacity, productivity, and security to help meet the growing demands of smart machines and

equipment for manufacturing.

• Integrated Motion over EtherNet/IP

for up to 256 axes.

• 1 Gb embedded Ethernet port enables high performance, communications, I/O, and motion control.

• Secure Digital (SD) card provides optional nonvolatile memory to store user program and tag data on the controller.

• Studio 5000 Automation Engineering & Design Environment® provides ease of system design and commissioning.

• Digitally signed and encrypted firmware helps protect against malicious intent.

• FactoryTalk® Security provides centralized authentication and access control by verifying the identity of each user-access attempt to the system.

• Display provides enhanced diagnostics and troubleshooting.

The GuardLogix controller is made up of a primary controller and a safety partner, for SIL 3 applications, that function together in a 1oo2 architecture. With a safety partner

installed, GuardLogix controllers are:

• Type-approved and certified for use in safety applications up to and including SIL 3 per IEC 61508.

• EC Type-approved for use in safety applications up to and including SIL CL3 per IEC 62061.

• EC Type-approved for use in safety applications up to and including Performance Level PLe (Category 4) per ISO 13849-1. When used without a safety partner

installed, SIL CL2 and PLd (Category 3) are achievable.

Summary of Changes

This manual contains new and updated information as indicated in the following table.

Catalog Numbers 1756-L81ES, 1756-L81ESK, 1756-L82ES, 1756-L82ESK, 1756-L83ES, 1756-L83ESK, 1756-L84ES, 1756-L84ESK,

1756-L8SP, 1756-L8SPK

Topic Page

Product Advisories 3

Parts List 4

Required System Components 5

Product Dimensions 5

Connectors and Status Indicators 6

Install the Controller 6