Roland CUBE-60D User Manual

16
JULY.2004
WHEN EXCHANGING AC CORD
Please note the following cautions when exchanging the AC cord.
Cautions
Before soldering wiring and terminal, wind the wire 1.5 times around the
terminal (refer to Fig. 1).
fig.2
When removing the AC cord from the board, be sure not to leave any wiring
debris on the terminals.
Ensure a minimum of 6 mm between electrodes (including portion with
winding).(Refer to fig2)
fig.1
Fig. 1
over
6 mm
Fig. 2

Roland CUBE-60D Specifications

General

Brand	Roland
Model	CUBE-60D
Category	Musical Instrument Amplifier
Language	English