®ÂØÒňÎ
®
HPD-15
Handsonic
TurboStart
TBS120 © 2000 Roland Corporation U.S., 5100 S. Eastern Ave., Los Angeles CA 90040 Faxback # 20156 Page 2
Playing Patterns
There are 99 preset patterns and 99 user patterns in
the HPD-15. Use the following procedure to play a
pattern.
1. Press SEQUENCER so it’s lit.
2. Turn the PATCH/VALUE dial to select Pattern
P76 Salsa w/b.
3. Press PLAY/STOP to begin playback.
4. Press PLAY/STOP once more to stop playback.
5. Turn the PATCH/VALUE dial to select Pattern
P96 AcoGuitTap. AcoGuitTap is one of the
HPD-15’s unique “tap patterns.”
6. Tap PLAY/STOP to move through the individual
notes, chords and strums of AcoGuitTap one tap
at a time.
7. Press SEQUENCER to exit.
Note: You can record up to 99 of your own four-part
user patterns in the HPD-15. Consult your Owner’s
Manual to learn more.
Recording a Pattern
A pattern can contain up to four parts: Percussion 1,
Percussion 2, Melody 1 and Melody 2. Use the
following steps to record the Percussion 1 part in a
looping pattern:
1. Press SEQUENCER so it’s lit.
2. Turn PATCH/VALUE dial to select a new,
unused user pattern. Unused patterns have a “#”
to the left of the word “User” on the display.
3. Press REC so it’s lit.
4. Play any pad to begin recording—the default
length for a new pattern is one measure.
5. Press PLAY/STOP when you’ve finished
recording.
6. Press WRITE to save your part.
7. Press PLAY/STOP to listen to the new pattern.
Note: To learn how to set up a pattern and how to
record other parts, see your Owner’s Manual.
To Previous Page
Loading...
Need help?
General
