REFERENCE
• For more about connections, refer to “Rear Panel Connections” (p. 22).
• For more about front center speaker (C jack) and subwoofer (LFE jack) output settings, refer to “Motional Surround Settings (MOTIONAL
SURROUND)” (p. 49) in System Settings.
* Dolby Digital and DTS are not supported. Please
use analog cables to connect ve speakers and a
subwoofer.
C
LFE
C
LsRs
LFE
R L
R
L
Ls Rs
1
2
EX
7
8
9
12
3
4
10
11
13
15
14
16
5
6
Jack
name
Explanation
L Front left output
R Front right output
C Front center output
Ls Rear left output
Rs Rear right output
LFE Subwoofer output
It’s best to place the subwoofer at the same
distance as the satellite speakers, with the
listening position at the center.
If you want to use Motional
Surround with a two-channel
system, connect your
speakers to the A (MIX) L
(MONO)/R jacks.
05 Creating a Sound Field with Depth
Connection example
Here’s an example of using the INTEGRA-7’s Motional Surround function for 5.1 channel surround output.
Place your speakers as shown in the illustration.
To use the Motional Surround function, press the [MOTIONAL SURROUND] button to turn the Motional Surround function on.
About the monitoring environment
• An acoustically dead space with minimal reverberation is ideal as a monitoring room.
• You should monitor at the sweet spot of your speaker system.
Concerning perception of a sound image’s location
• The ease with which one can sense where a sound emanates from can dier depending on the sound.
For example, it is dicult to perceive the spatial location of low-frequency sounds or sounds that have relatively little harmonic content
(such as sine waves). Conversely, it tends to be easier to determine the location of sounds having rich harmonic content and a distinct
attack.
• Perception of front/back localization can dier between individuals.
16
To Next Page
Need help?
General
Weight and Dimensions
